Canon LV-7555 Owner's Manual page 27

Display area
Selects area displayed with this projector. Select resolution at
Display area dialog box.
Display area H
Adjustment of horizontal area displayed with this projector. Press
POINT LEFT/RIGHT button(s) to decrease/increase value and then
press SET button.
Display area V
Adjustment of vertical area displayed with this projector. Press
POINT LEFT/RIGHT button(s) to decrease/increase value and then
press SET button.
Full screen
Press POINT LEFT/RIGHT button(s) to switch Full screen function to
"On" or "Off." Set "On" to resize image with 4 x 3 aspect ratio to fit
screen. This function cannot be adjusted when "ON" is selected on
Anamorphic function (P38).
NOTE : Fine sync, Display area, Display area H, Display area V and
Full screen cannot be adjusted when "480p", "575p", "480i",
"575i", "720p (HDTV)", "1035i (HDTV)" or "1080i (HDTV)" is
selected on PC SYSTEM Menu (P24).
3
Store
To store adjustment parameters, move a red frame pointer to
Store icon and then press SET button. Move a red arrow pointer
to any of Mode 1 to 5 that you want to store and then press SET
button.
Mode free
To clear adjustment parameters previously set, move a red
frame pointer to Mode free icon and then SET button. Move a
red arrow pointer to Mode that you want to clear and then press
SET button.
Other icons operates as follows.
Reset
Reset all adjust parameters on adjustment dialog box to previous
figure.
Quit
Closes PC ADJUST MENU.
COMPUTER INPUT
Press SET button at Display
area icon and Display area
dialog box appears.
Press POINT LEFT
/RIGHT button(s) to
adjust value and then
press SET button.
To store adjustment data.
This Mode has parameters being stored.
Store icon Vacant Mode Shows values of "Total dots,"
"Horizontal," "Vertical," "Display
area H," and "Display area V."
To clear adjustment data.
Mode free icon
Display area
Close this dialog box.
27