Computer Input; Input Source Selection - Canon LV-S3 Owner's Manual

Computer Input

Input Source Selection

Direct Operation
Choose Computer by pressing INPUT button on the top control or
COMPUTER button on the remote control unit.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Menu Operation
1 Press the MENU button to display the On-Screen Menu. Press
Point 7 8 buttons to move the red frame pointer to INPUT
Menu icon.
2 Press Point d
Computer and then press SET button. The Source Select Menu
will appear.
3 Move the pointer to the correct input source and press SET
button.
When the input source is coming from a computer
RGB
through the RGB IN / COMPONENT IN terminal,
select RGB.
Component
21-pin ) " P31.
RGB (Scart)
21-pin ) " P31.
22
button to move the red arrow pointer to
" Selecting Input Source (Component / RGB-Scart
" Selecting Input Source (Component / RGB-Scart
INPUT button
Computer
Video
Input Menu icon
INPUT MENU
Move the pointer (red
arrow) to Computer and
press SET button.
Source Select Menu
Move the pointer to RGB and
press the SET button.