Top - Canon LV-5210 Owner's Manual

Top

This projector has control buttons and indicators on its top.
q
MENU button
Opens or closes the On-Screen Menu. (p22)
w
SET button
Executes the item selected. It is also used to expand /
compress the image in Digital zoom +/– mode. (p31)
e
KEYSTONE button
Corrects keystone distortion. (p20, 38)
r
POWER ON–OFF button
Turns the projector on or off. (p19)
POWER indicator
Flashes red until the projector gets ready to be turned on. It
turns red when the projector is in the stand-by mode. It
remains green while the projector is under operation.
q w e
MENU
KEY
SET
STONE
VOL
VOL
-
+
LAMP REPLACE
INPUT
t y u
Part Names and Functions
POWER
WARNING
i
t
INPUT button
Selects input source. (p24, 32 )
y
POINT (Up/Down/Left/Right ) button
Selects an item or adjusts value in the On-Screen Menu. These
are also used to pan the image in the Digital zoom +/– mode.
(p31)
Point Left/Right buttons are used as VOL +/– button. (p21)
u
LAMP REPLACE indicator
Turns yellow when the life of the projection lamp draws to an
end. (p43)
i
WARNING indicator
Lights red when the projector detects abnormal condition. This
also flashes red when the internal temperature of the projector
exceeds the operating range. (p41)
r
11