Installation
Connecting to Video Equipment
Cables used for connection
• Video Cable (RCA x 1) ✽
• S-VIDEO Cable ✽
• Audio Cables (Mini Plug (stereo) x 2 or RCA x 2) ✽
Video Source (example)
Video Cassette Recorder
RGB Scart
21-pin Output
Scart-VGA
✽
Cable
RGB IN-2 /
COMPONENT IN/
RGB OUT
NOTE
G The S-VIDEO IN jack has priority over the VIDEO IN jack under
the condition of connecting both the S-VIDEO IN jack and the
VIDEO IN jack when selecting AUTO in the Input Menu.
G Select COMPUTER 2 in the Setting Menu when the RGB IN-2/
COMPONENT IN/ RGB OUT terminal is used as RGB Scart 21-
Pin video input or Component video input. (See "Terminal" on
page 39.)
G Input sound to the COMPUTER AUDIO IN terminal when
using the RGB IN-2/ COMPONENT IN/ RGB OUT terminal as
input.
NOTE :
When connecting the cable, the power
cords of both the projector and the
external
disconnected from AC outlet.
18
(
✽
= These accessories are not supplied with this projector.)
Component Video Output
S-VIDEO
(Y, Pb/Cb, Pr/Cr)
Output
Component-
S-VIDEO
✽
Cable
✽
VGA Cable
S-VIDEO IN
RGB IN-2 /
COMPONENT IN/
RGB OUT
DVI-I/
RGB IN-1
MCI
equipment
should
be
• Scart-VGA Cable ✽
• Component-VGA Cable ✽
Component video output equipment.
(such as DVD player or high-definition TV source.)
Digital Camcorder
Audio Output
Composite Video Output
(R, L)
Audio Cable
(RCA x 2)
✽
AUDIO IN
VIDEO IN
AUDIO
VIDEO IN
R
IN
L
S-VIDEO IN
SERVICE PORT
COMPUTER
AUDIO IN
RESET
AUDIO OUT
RGB IN-2/
COMPONENT IN/
RGB OUT
AUDIO OUT
Audio Input
External Audio Equipment
Audio Amplifier
Audio Output
Video Cable
Audio Cable
(RCA x 1s)
✽
(Stereo)
✽
COMPUTER
AUDIO IN
Terminals
of the Projector
Audio Cable
(Stereo)
✽
Audio Speaker
(stereo)