Table of Contents
Advertisement
3. MECHANICAL DISASSEMBLIES
Mechanical disassemble should be made following procedures in numerical order.
Following steps show the basic procedures, therefore unnecessary step may be
ignored.
The parts and screws should be placed exactly the same position as the
CAUTION
original otherwise it may cause loss of performance and product safety.
3.1 Cabinet Top, FN901 Removal
1. Remove 4 screws A (M3×8), B (M3×6) and pull the
Cabinet Top upward off.
2. Disconnect terminal "K6J" on the Main Board and
then pull the fan duct ass'y upward off.
3. Remove 2 screws C (T3×6) and remove fan "FN901".
FN901
Cabinet Top
A
C
C
B
Fig. 2-5
2-5
Part 2: Repair Information
Screws Expression
(Type Diameter × Length) mm
T type
M Type
A
B
Advertisement
Table of Contents
