Error No.: 300 Is Displayed - Canon PIXMA iP3500 Series Quick Start Manual

Error No.: 300 Is Displayed

Cause
The printer is not ready.
Printer is not connected properly.
Your printer is not selected in Printer
on the Print dialog box.
Error No.: 1700/1710 Is Displayed
Cause
The ink absorber is almost full.
Error No.: 2001 Is Displayed
Cause
No response from connected digital
camera or video camcorder. /
Connected digital camera or video
camcorder connected is not compatible
with this printer.
Confirm that the POWER lamp is lit green.
If the POWER lamp is off, turn the printer on.
While the POWER lamp is flashing green, the printer is initializing. Wait until the
POWER lamp stops flashing and remains lit green.
If the ALARM lamp is flashing orange, an error may have occurred in the
printer. For details on how to resolve the error, see "ALARM Lamp Flashes
Orange" on page 64.
Make sure that the USB cable is securely plugged in to the printer and the
computer.
If you are using a relay device such as a USB hub, disconnect it, connect the
printer directly to the computer, and try printing again. If printing starts
normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.
There could also be a problem with the USB cable. Replace the USB cable
and try printing again.
Select your printer's name in Printer on the Print dialog box.
If your printer's name does not appear in Printer, follow the procedure below to
check that the driver for your printer is installed to your computer.
(1)Select Print & Fax Preferences from Printer.
In Mac OS X v.10.2.8 or 10.3.x, select Edit Printer List from Printer.
(2)Check that your printer's name is displayed in the list of printers and that the
check box is selected.
In Mac OS X v.10.2.8, check that your printer's name is displayed in the
Printer List.
(3)If your printer's name is not displayed, click Add(+) to add the printer.
If you cannot add the printer, follow the procedure described in your setup
sheet to reinstall the printer driver.
See "Eight flashes: Ink absorber is almost full." on page 64 in "ALARM Lamp
Flashes Orange" on page 64.
See "Nine flashes: No response from connected digital camera or video
camcorder. / Connected digital camera or video camcorder is not compatible
with this printer." on page 65 in "ALARM Lamp Flashes Orange" on page 64.
Action
Action
Action
Troubleshooting 67