Safety Precautions - Josef Kihlberg JK10-680 Operating Instruction

EN

Safety precautions

The employer is responsible for ensuring that:
• these Operating Instructions and appended documents
are made available to all personnel concerned, and that
they read, understand and comply with the instructions;
• the personnel operating the tool are sufficiently trained
and are well aware of the risks of accident, appropriate
working methods and tool maintenance;
• general safety regulations, and specific regulations with
respect to minors working with nail guns/stapler tools,
are complied with;
• personnel are given the instructions, equipment and time
to perform daily tool inspection.
Please read these safety precautions carefully to prevent
injury to yourself and others. Refer to the later sections for
additional information.
To prevent eye injuries, the operator and others in the
work area should wear eye protection.
Ear protection and other personal protection equipment
should also be worn as required.
Never use oxygen, combustible gases, CO2, steam
or high pressure gas tanks as power sources for the PN
(pneumatic) version of this tool as these may cause the tool
to explode and cause serious injury. Only use dry, clean,
regulated compressed air to power the tool.
Never use a defective tool. Inspect the tool every day
to ensure that the trigger is working properly and that all
screws and nuts are secured tightly.
6
© Josef Kihlberg AB 2007