Josef Kihlberg JK10-680 Operating Instruction page 7

Safety precautions
It is not permissible to make changes or modifications to
this tool or set it up in a jig without the manufacturer's ap-
proval.
Always disconnect the tool from the air supply and empty
the magazine when you leave the tool for breaks, at the end
of the day, when troubleshooting, or when carrying out main-
tenance or repairs. Never leave a loaded tool unattended.
Always assume that the tool is loaded. This is a working
implement and not a toy. Never point the tool at yourself or
anyone else, whether it contains staples or not. Always re-
move your finger from the trigger when not driving staples.
Avoid personal injury. Never hold your hand or any other
part of your body under the tool. Always place yourself in a
firmly balanced position when using the tool.
Connect the tool to the compressed air system before the
fastener unit is loaded. The maximum permitted air pressure
for the tool is 6 bar (90 psi). The maximum supply pressure
is 6.6 bar (91 psi). Make sure that the minimum internal di-
ameter of the air hose is 6 mm (1/4") and that of the nipple is
a minimum of 5 mm (6/32"). This will prevent incorrect opera-
tion due to a significant drop in pressure. The tool and the
hose must be fitted with a connection nipple that automati-
cally bleeds the tool when it is disconnected.
© Josef Kihlberg AB 2007
EN
7