Chapter 2 Installation; Installation Instruction; Server Installation - HIKVISION DS-IE1032-03U/BA Quick Start Manual

2.1 Installation Instruction

Before installing the server, please be advised of following tips:
 Check the delivered package. If any object is damaged or lacked, please contact the dealer.
 Ensure the server is installed in a well-ventilated, dust-free environment.
 Keep away from hot source, electric noise, and electromagnetic field.
 To ensure adequate airflow and safety, install the server in a dedicated rack.
 Use a rack with enough bearing capacity. And properly keep the server.
 To ensure adequate airflow and convenient maintenance, deploy sufficient room for rack and
wall.
 Provide the server with rated power supply.
 Do not share server power socket with other devices.
 Ensure the rack is correctly grounded.
 It is highly recommended that an Uninterruptible Power Supply (UPS) is used in conjunction
with the server.
 As a Class A product, the server may cause radio interference. You are recommended to take
practical measures for the interference.
2.2 Uninstall Power Module
Purpose:
Follow the steps to uninstall power modules.
Step 1 Unlock the power module via the spring bolt.
Step 2 Pull the power module out of the server.

2.3 Server Installation

Purpose:
Follow the steps to install the rear part of inner rails in the server. The front part has been installed
when delivered.
Recognition Server Quick Start Guide

Chapter 2 Installation

7