Canon BJC-S820 Quick Start Manual page 62

S820QSG.book Page 58 Thursday, October 18, 2001 1:41 PM
Appendix
Power Supply
•
Always push the plug completely into the power outlet. A loose or poorly
connected plug could cause a fire or electric shock.
•
Never use the printer if the power cord is bundled or knotted. To prevent the
hazards of fire or electric shock, make sure the power cord is straight.
•
Always grasp the plug when you unplug the power cord. Pulling on the power
cord could damage the cord and cause a fire or electric shock.
58
Never attempt to plug the power cord into a power outlet when
your hands are wet. To avoid electric shock, make sure that your
hands are dry.
Never cut, modify, stretch, bend, or twist the power cord, and
never place heavy objects on the power cord. A power leak from a
damaged power cord could cause a fire or electric shock.
Never plug the printer power cord into a power outlet (power
board, double adapter, etc.) that is shared by other devices or
office equipment. To prevent the hazards of fire or electric shock,
avoid overloading power points.
If you detect smoke, unusual odors, or strange noises around the
printer, immediately press the POWER button to turn off the
printer and disconnect the power plug. To avoid fire or electric
shock, never use the printer under these conditions. Call the
Canon Customer Care Center.
Never use an extension cord. To avoid a fire or electric shock,
always plug the power cord directly into the power outlet.
Never use a power supply voltage other than that supplied in the
country where you purchased the printer. Using incorrect voltage
could cause a fire or electric shock. The correct power supply
voltage for this printer is AC 120V, 60 Hz.