Canon BJC-S820 Quick Start Manual page 13

S820QSG.book Page 9 Thursday, October 18, 2001 1:41 PM
To load High Gloss Photo Film:
1.
Set the paper thickness lever to the left, towards the paper mark.
2.
Slide the paper guide completely to the left.
3.
With the print side facing up, align a sheet of High Gloss Photo Film with the
right side of the sheet feeder and insert the sheet into the printer until it stops.
4.
Slide the paper guide right to the edge of the sheet.
To load Glossy Photo Paper:
1.
Set the paper thickness lever to the left, towards the paper mark.
2.
Slide the paper guide completely to the left.
3.
With the glossy side facing up, align a sheet of Glossy Photo Paper with the
right side of the sheet feeder, then insert the sheet into the printer until it stops.
4.
Slide the paper guide right to the edge of the sheet.
To load Photo Paper Pro (4" x 6") or Glossy Photo Cards:
1.
Set the paper thickness lever to the
left, towards the paper mark.
2.
Slide the paper guide completely to
the left.
3.
With the glossy side up, place the
sheet of media on top of the Loading
Support Sheet provided with the pack
of Glossy Photo Cards or Photo Paper
Pro and align both sheets.
•
You can load only one sheet of High Gloss Photo Film in the
sheet feeder at a time.
•
Load the sheet of High Gloss Photo Film with the cut corner in the
upper right corner to ensure that the correct print side is facing up.
You can load only one sheet of Glossy Photo Paper in the sheet
feeder at a time.
Basic Printing
9