Canon BJC-S820 Quick Start Manual page 14

S820QSG.book Page 10 Thursday, October 18, 2001 1:41 PM
Basic Printing
4.
Align the stack with the right side of the sheet feeder, then insert the stack
into the printer.
5.
Slide the paper guide right to the edge of the stack.
To load T-Shirt Transfers:
1.
Set the paper thickness lever to the right, towards the
envelope mark.
2.
Slide the paper guide completely to the left and raise
the paper rest.
3.
Load the T-Shirt Transfer with the printing side (side
without the green line) facing up.
4.
Slide the guide right to the edge of the sheet.
10
•
You can load up to 20 sheets of Photo Paper Pro 4" x 6" or
Glossy Photo Cards at a time with the loading support sheet.
•
Make sure that the loading support sheet is pointing down
in the direction of the arrow.
•
To avoid jamming, never load a Glossy Photo Card or a sheet
of Photo Paper Pro 4" x 6" that is curled or bent, and make
sure that the edges of the card and the loading support sheet
are aligned before setting them in the printer.
•
Load only one T-Shirt Transfer at a time.
•
Transfer the image to the T-Shirt as soon as possible. See the
instructions provided with the T-Shirt Transfers.
Paper thickness lever