Canon BJC-S820 Quick Start Manual page 12

S820QSG.book Page 8 Thursday, October 18, 2001 1:41 PM
Basic Printing
•
Cover printed sheets with one sheet of plain paper to protect the printed
surface, even if you intend to store them in clear plastic folders.
To load plain or High Resolution Paper:
1.
Set the paper thickness lever to the left, towards the
paper mark.
2.
Slide the paper guide completely to the left.
3.
Fan the edges of the sheets to remove static cling. Tap
the edges of the stack against a flat surface so the stack
is aligned.
4.
With the whiter side facing up, align the stack with
the right side of the sheet feeder.
5.
Slide the paper guide right to the edge of the sheet.
To load Photo Paper Pro:
1.
Set the paper thickness lever to the left, towards the paper mark.
2.
Slide the paper guide completely to the left.
3.
With the glossy side facing up, align a sheet of Photo Paper Pro with the right
side of the sheet feeder, then insert the sheet into the printer until it stops.
4.
Slide the paper guide right to the edge of the sheet.
8
For instructions on loading transparencies and banner paper, see the
S820 User's Guide on the Setup Software & User's Guide CD-ROM.
You can load up to 100 sheets of plain
(17 lb.) paper or 80 sheets of High
Resolution Paper in the sheet feeder at
one time. When you use High Resolution
Paper, do not touch the whiter print side.
Load only one sheet of Photo Paper Pro in the sheet feeder at
a time.
Paper thickness lever