Canon BJC-S820 Quick Start Manual page 61

S820QSG.book Page 57 Thursday, October 18, 2001 1:41 PM
Read and follow all of these cautions and warnings to ensure the safe use of the
printer. To avoid the hazards of fire, personal injury, or damage to the printer,
never attempt to use the printer in any way other than the methods described in
this guide.
Choosing a Location
•
Never set the printer on a surface that is unstable or subject to excessive
vibration. The printer could tip or fall and cause injury.
•
Never use the printer in a location that is subject to high humidity, dust, high
temperatures, or direct sunlight.
•
Set up and use the printer in a location where ambient temperature is within
41˚F–95˚F (5˚C–35˚C) and 10%–90% humidity with no condensation.
•
Always carry the printer with both hands holding both ends of the printer. To
avoid dropping the printer and causing injury, always carry it carefully when
moving it to another location.
Always follow the instructions provided in Cautions to prevent
minor injuries to yourself or damage to the equipment as a result
of careless operation of the equipment.
Never place the printer near flammable solvents such as alcohol,
thinner, etc. To avoid the hazards of fire or electric shock, keep all
flammable liquids away from the printer.
Never place the printer on a thick carpet or rug. Fibers or dust
entering the printer could cause a fire.
Keep the power outlet for the printer free of all obstacles so you
can unplug the power cord at any time. Such obstacles could
prevent you from unplugging the printer when a printer fault
occurs and cause a fire or electric shock. The socket-outlet shall
be installed near the equipment and shall be easily accessible.
Appendix
57