Canon BJC-S820 Quick Start Manual page 45

S820QSG.book Page 41 Thursday, October 18, 2001 1:41 PM
To load Photo Paper Pro for Borderless Printing 4" x 6":
1.
Set the paper thickness lever to the left.
2.
Slide the paper guide completely to the left.
3.
With the glossy side facing up, place a sheet on top
of the Loading Support Sheet provided with your
Canon Photo Paper Pro for Borderless Printing
4" x 6" media.
4.
Align the edges of both sheets.
5.
Align the media with the right side of the sheet
feeder, then insert both the loading support sheet
and the borderless paper into the paper rest, with
the print side of the borderless paper on top and
facing up.
6.
Slide the paper guide right to the edge of the stack.
To print with borderless paper for Windows:
1.
Follow the procedures above to load the borderless paper.
2.
From ZoomBrowser EX, select the photo to be printed.
3.
Click Print, then click Layout. The PhotoRecord Print Modes wizard
will appear.
4.
Select the desired printer, then select Borderless Printing (Tiled photo) from
the Print Mode options.
You can load up to 20 sheets of Canon Photo Paper Pro for
Borderless Printing 4" x 6" at a time, with the loading support
sheet at the bottom of the stack.
Make sure the loading support sheet is pointing in the direction
of the arrow.
To avoid paper jams, never load a sheet that is curled or bent,
and make sure the edges of the card and the loading support
sheet are aligned before setting them in the paper rest.
The Borderless Printing (Tiled photo) check box is available only
when you are using a printer which supports this feature.
Using Your Photo Applications
Paper thickness lever
41