Canon BJC-70 User Manual page 164

When you set this FUNCTION to OFF, memory reserved for the input and
download buffers is used exclusively as an input buffer. No download
buffer is maintained under these conditions.
Set this FUNCTION to ON when you want some memory to be used as a
download buffer. Of the total amount of memory reserved for the input
and download buffers, 3 KB is allocated for an input buffer and the
remainder is used as a download buffer.
FUNCTION 10: Automatic line feed
Use this FUNCTION to determine the type of carriage return. When this
FUNCTION is OFF, the printer performs a normal carriage return (CR
only). When this FUNCTION is ON, the printer follows each carriage
return with a line feed (CR + LF).
FUNCTION 11: Automatic carriage return
When this setting is OFF, the printer performs a normal line feed (LF only).
Set this FUNCTION to ON if you want the printer to perform a carriage
return after each line feed (LF + CR).
FUNCTION 12: Alternate graphics mode
Set this FUNCTION to ON to enable Alternate Graphics Mode (AGM).
In this mode, the printer accepts high-resolution, 24-dot, all-points-
addressable (APA) graphics commands similar to those used with
conventional 24-pin printers.
FUNCTION 14: Character set
When this setting is OFF, the printer uses Character Set 1. When this setting
is ON, the printer uses Character Set 2.
FUNCTIONs 15, 16, 17, 18: Code page
These FUNCTIONs allow you to select the following code page tables.
Code page/Character set
437 USA, English
850 Multilingual (Latin I)
863 French Canadian
865 Norwegian
860 Portuguese
857 Turkish
855 Cyrillic
852 Slavic (Latin II)
864 Arabic
869 Greek
154
Customizing the Printer
FUNCTION Settings
15 16
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF ON
OFF ON
OFF ON
OFF ON
ON OFF
ON OFF
17 18
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
OFF ON
Chapter 9