Selecting the Reduction Mode
We recommend that you use Reduction mode with MS-DOS applications
only (not Windows applications). Windows applications have a fit-to-page
feature that is not compatible with Reduction mode.
To select the reduction mode, follow these steps:
1.
Press the
2.
Press the
3.
Press the
4.
When the desired Reduction mode is blinking, press the
button.
92
Using the Operator Panel
button once.
MENU
The printer beeps once when it enters Menu mode.
button again.
MENU
The display shows the possible Reduction modes:
button to select the desired Reduction mode.
The
light comes on.
ON LINE
Printing in the selected Reduction mode is enabled.
ON LINE
Chapter 6