Overall Printing Is Slow From Ms-Dos; Overall Printing Is Slow From Windows - Canon BJC-70 User Manual

Problem
Overall printing is slow
from MS-DOS
Overall printing is slow
from Windows
Chapter 8
Cause
Smoothing mode may be
enabled.
High quality mode may
be enabled.
The print head may have
become too hot.
The Print Manager may
be turned on.
Print options may be too
complex.
Solution
Disable the smoothing mode.
Try turning off HQ mode via
the operator panel.
If you have been printing
for awhile, the print head
may have become too hot.
In this case, the printer
automatically goes into
protection mode and slows
down in order to cool the
print head. You can stop
your print operation and
wait several minutes to allow
the printer to cool. Then start
your print operation again.
Make sure the Print Manager
is turned off.
In the Windows driver or
your software application,
set all print options to their
defaults, such as: Plain
Paper, Color mode or Black
and White mode, High
Quality, Pattern Halftone.
See Printing Speed Versus
Color on page 66 for complete
details.
Troubleshooting
123