Würth AL30-CV-IND-LI Manual page 10

 Do not place metal objects on the charger or
between battery and charger. Metal objects can
heat up and lead to injuries.
 Do not place credit cards or other magnetic
data carriers near the charger. Stored data on
these data carriers can be deleted.
 Use only original Würth accessories.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and Specifications
The charger is intended for recharging inductive 18 V Li-Ion
batteries. The inductive charging is performed by means of a
contactless charging process using magnetic induction.
For damage caused by usage other than intended, the user is
responsible.
Product Features
The numbering of the product features refers to the illustration
of the charger on the graphics page.
1 Inductive battery*
2 Standby indicator (green)
3 Charge status indicator
4 Error indicator (red)
5 Charging platform
6 Holder
*Some accessories shown or described are not part of
the standard delivery scope of the product.
Read all safety warnings
and all instructions. Failure
to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Tool Specifications
Battery Charger
Art. No.
Battery charging voltage
(automatic voltage detection)
Charging current
Allowable charging temperature
range
Charging time for battery
capacity, approx.
– 2.0 Ah
– 4.0 Ah
Number of battery cells
Weight according to
EPTA-Procedure 01:2014
Protection class
Battery
Art. No.
Rated voltage V=
Capacity Ah
Number of battery
cells
Weight kg
EC-Declaration of
Conformity
We declare under our sole responsibility that the product
described under "Tool Specifications" complies with all appli-
cable provisions of the directives 2011/65/EU,
2006/95/EC, 1999/5/EC including their amendments and
is in conformity with the following standards:
EN 60335-1:2012, EN 60335-2-29:2004 + A2:2010,
EN 62311:2008-01, Draft EN 300 330-1 V1.8.0:2014-06,
Draft EN 300 330-2 V1.6.0:2014-06, EN 301 489-1
V1.9.2:2011-09, EN 301 489-3 V1.6.1:2013-08.
AL30-CV-IND-LI
5703 500
V
A
°C
(80%)
min (35)
min (65)
kg
LI-CV-IND- LI-CV-IND-
18V/2,0AH 18V/4,0AH
5704 500 120 5704 500 140
18
2.0
1 x 5
0.53
0560
18
3.0
0 – 45
100%
45
85
5 – 10
0.58
/ II
18
4.0
2 x 5
0.71
10