Download  Print this page

Scanning With The Operation Panel Of The Machine - Canon PIXMA MP160 User Manual

Canon pixma mp160: user guide.
Hide thumbs

Advertisement

Table of Contents

Scanning With The Operation Panel Of The Machine

With the operation panel of the machine, you can open the MP Navigator and change the
settings for the scanning operations. (See the Scanning Guide)
If you are using Windows XP
The program selection screen is displayed the first time you press [Black] / [Color] (MP180) or
[SCAN] (MP160) on the machine. Specify [MP Navigator Ver.3.0] as the application software to
use, check [Always use this program for this action], then click [OK]. From the next time, MP
Navigator is automatically started.
When using Mac OS X
For the machine to start scanning when [Black] / [Color] (MP180) or [SCAN] (MP160) is pressed,
you need to set MP Navigator as the starting application software in Image Capture under
[Applications] of Mac OS X.
Important
If you are using Macintosh OS X v.10.3.x
Select [Applications] from the [Go] menu, then double-click [Image Capture]. Click [Options] at
lower left of the scanner window, select [MP Navigator 3.0] from [Application to launch when
scanner button is pressed], then click [OK].
Important
If you are using Macintosh OS X v.10.2.8
Select [Applications] from the [Go] menu, then double-click [Image Capture]. Select
[Preferences] from the [Image Capture] menu. Select [Others] from [When a scanner button is
pressed, open], select [MP Navigator 3.0] from [Applications], then click [Open].
1
Load the document on the Platen Glass. (See page 15)
2
Press [SCAN].
The machine switches to Scan Mode.
3
Press [Black] or [Color].
The MP Navigator opens.
1
Load the document on the Platen Glass. (See page 15)
2
Press [SCAN].
The MP Navigator opens.
Note
58
Scanning Images
Make sure that the MP Navigator is installed and that the Macintosh is
connected to the machine before starting up Image Capture.
If you select [Preferences] from the [Image Capture] menu, click
[Scanner], and mark [Use TWAIN software whenever possible], [Options]
is not displayed. In this case, click [Use TWAIN software whenever
possible] to uncheck the option, exit the Image Capture, then start it
again.
The subsequent procedure varies depending on your settings.
For details, see the Scanning Guide.
Chapter 6

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments:
  • Wayne Bohannon Jan 18, 2019 04:52:
    Printer shows E 2 flashing. off/on green light flashing. Yellow alarm light flashing.
  • winnie Mar 04, 2018 06:13:
    not responding to any commands.
    on/off green light continues to blink
    erro​r blinking
  • mahmad Aug 22, 2015 01:25:
    CANONpixma​2840 bjulg lu lgthj حيب kihzd td ,dk],. 7