Changing The Machine Settings (Mp180); Changing The Settings; Print Settings - Canon PIXMA MP160 User Manual

Chapter 8

Changing The Machine Settings (MP180)

Changing The Settings

This section describes the procedure to change the settings in the <SYSTEM SETTINGS> menu,
taking the steps to specify <EXTENDED AMOUNT> as an example.
1
Press [ON/OFF] to turn ON the machine. (See page 14)
2
Press [Menu] repeatedly until <SYSTEM SETTINGS> appears.
3
Use [ ] or [
4
Use [ ] or [
EXTENDED AMOUNT
5
Use [ ] or [
Note

PRINT SETTINGS

QUIET MODE
Use this function if you want to reduce the operation noise, such as when printing at night: ON/
OFF
Important
EXTENDED AMOUNT
Selects the amount of image that extends off the paper when printing in borderless: SMALL/
LARGE
64
Changing The Machine Settings (MP180)
] to select <PRINT SETTINGS>, then press [OK].
] to select <EXTENDED AMOUNT>, then press [OK].
SMALL
] to select <SMALL> or <LARGE>, then press [OK].
Depending on the functions you use, some setting items cannot be
specified in combination.
The printing speed may be reduced compared to when this setting is
set to <OFF>.
This function may not be so effective depending on the Image Quality
setting.
Certain noise, such as when the machine is preparing for printing, is
not reduced.
Chapter 8