Connect the PictBridge-compliant device to the machine.
(1) Connect the device to the machine using the USB cable (for connection to a computer)
supplied with the device.
(2) Turn ON and set up the device for direct printing.
When the connection between the device and machine has been established, <CAMERA
DIRECT> (MP180) or <C> (MP160) appears on the machine.
* The power-on sequence may differ depending on the model or brand of the device.
Following icon will display on the LCD display of the device when the machine is correctly
A PictBridge-compliant device.
* This mark indicates that the product is PictBridge-compatible.
Confirming Or Changing The Device Settings
To change the paper size or paper type, operate the device to select the PictBridge print setup
mode and confirm or change the settings.
The settings below can be changed by pressing [Menu] (MP180) or [Paper] / [Fit to Page]
(MP160) when the PictBridge-compliant device is connected.
However, changes can only be made on the properties screen when the corresponding items
below are in the "Default setting" (selections based on the machine setting) using the controls of
Image optimize (MP180)
You can specify these settings on MP180 in the <PICTBRIDGE SET>. (See page 65)
Printing Photographs Directly From A Digital Camera