idi Aspect 100-4 Q-CARD Quick Start Manual

Aspect 100-4 Q-CARD
WARNING!
Read operator manual prior to use

SETUP

Moving table to desired location:
1) Make sure all casters are unlocked
2) Position table

AC Power:

1) Plug power cord into properly grounded outlet
2) Protect cord from damage by casters or other
equipment

Controls:

1) Connect hand control and foot control (if equipped)
2) Lock all casters
3) Operate controls to ascertain power is present and
table functions properly

AC FAILURE

Internal battery allows table to be returned to a
position to safely remove patient

CPR

Retract tabletop and lower table position to a
comfortable height to perform CPR

CLEANING AND STORAGE

1) Lock casters
2) Unplug power cord
3) Clean and disinfect table.
www.imagediagnostics.com