Automatic Shutdown; Channel Selection - Pace MBT 250 Operation & Maintenance Instructions Manual

AUTOMATIC SHUTDOWN

10. The system enables the Automatic
Shutdown feature only when the
Automatic Setback feature is
enabled. No additional steps are
necessary.

CHANNEL SELECTION

11. The Channel 1 LED is now lit
signifying that Channel 1 is ready for
calibration. Perform steps 12
through 21 to calibrate. As channels
change, repeat these steps for each
channel.
All temperature limits are stored in
system memory in degrees F.
LOWER TEMPERATURE LIMIT
SETPOINT
12. Press and release the Tip Temperature Set Key. The Digital Readout will
6
NOTE