Install Handset - Canon FaxPhone L90 Starter Manual

Before FAX Setting

Install Handset

1
Use a screwdriver to remove the covers on the left side of
the machine.
2
Insert the plugs with pins (A) into the holes on the
handset cradle.
Do not insert the pins all the way into the plugs at this point.
3
Insert the plugs (with the cradle) into the holes on the
machine.
12
4
Carefully push the pins into the plugs as far as they will
go.
5
Place the handset on the cradle.
6
A
Hook the handset cable on the retainer (A) at the back of
the machine to retain the slack.
If using the handset or an external telephone, make sure to
set the fax receive mode to <FAX/TEL> or <MANUAL>. For
how to set the receive mode, see "Set the Receive Mode, " on
p. 16.