Tannoy QFLEX 16LS-WP Quick Start Manual page 9

16
QFLEX 16LS-WP
Unpacking
Every Tannoy QFlex product is carefully tested and inspected before being packaged and leaving the factory. After unpacking your loudspeaker, please inspect for any
exterior physical damage, and save the carton and any relevant packaging materials in case the loudspeaker again requires packing and shipping. In the event that
damage has been sustained in transit, notify your dealer immediately. Each QFlex carton is marked to show each modules position in the array.
Models
Model Modules
QFlex 16LS-WP 1x QFlex 8M-16LS-WP + 1x QFlex 8ST-16LS-WP + 1xQFlex Bracket-WP + 1x QFlex 16LS COVER-WP
QFlex 16LS-WP
Connections
NOTE: QFlex is a professional product intended for installation by properly qualified and certificated personnel.
Cable Management
All connections (AC, Network, and Signal) are accessed at the bottom of the QFlex column. This allows for neat, unobtrusive cable management in your installation.
The connectors will not be visible when installation is complete. Connections are accessed by the removal of the lower rear access plate on a QFlex master which will
require the use of a Philips screwdriver.
With the plate removed the connector areas look like this
AUDIO A IN AUDIO A LINK SYSTEM
VNET/AES3 IN & LINK MAINS IN
End view
Top view
17
Quick Start Guide