Table of Contents
Advertisement
3. Ensure that the gauge is powered by pressing the Power Button – the
Power Button should now display a green light (Figure 2).
N.B. Once the Power Button has been pressed, RouteScan goes through
a start-up period – it is not possible to turn off RouteScan until start-up is
complete. During start-up the Laser Housing will rotate as part of a self-
calibration routine; do not interfere with it during this period.
4. Select the desired gauge from the list
5. Please be patient while the Control Unit makes the connection
6. When the connection has been made, the 'Options' screen is displayed
(Figure 3)
1
The Abtus Gauge Interface software is common to all Abtus Bluetooth products and so it is possible
to 'Pair' the Control Unit with a number of different gauges
Figure 1
Figure 2
1
and click the 'Connect' button
4650-1 Issue 04
5
Advertisement
Table of Contents
