Cleaning And Storage; Technical Data - Vitalmaxx CL-S120 Operating Instructions Manual

EN
6. Also activate the heat function if necessary (see the "Device Overview" chapter –
"Controller"). It is also possible to exclusively switch on the heat function by switching
off all massage zones and selecting the Wärme (heat) button (14).
Remain lying on the massage mat for the time you want. We recommend that
you use each massage programme for no more than 15 minutes.
7. The device switches off automatically after approx. 15 minutes. For another massage
programme, switch the device on again via the controller.
8. Pull the mains adapter out of the plug socket and the barrel connector from the device.
9. Allow the device to cool down if the heating function was activated before it is stored
away or cleaned (see the "Cleaning and Storage" chapter).

Cleaning and Storage

PLEASE NOTE!
■ Do not use any caustic or abrasive cleaning agents or cleaning pads to clean the
device. These may damage the surfaces.
• Make sure that the device is not connected to the mains power and has cooled down if
applicable.
• Clean the device only with a slightly damp cloth.
• When storing it away, do not press the device together too strongly and do not use
any force. It could be damaged.
• Keep the device in its respective packaging in a dry place which is protected from
sunlight and is not accessible to children or animals.

Technical Data

Article number:
ID of operating instructions: Z 05630 M DS V1 1119
Device:
Model:
Voltage supply:
Power:
Mains adapter:
Model:
Input voltage:
Output voltage:
Protection class:
18
05630
CL-S120
12 V DC
30 W
IVP1200-2500G
100 – 240 V ~ 50 / 60 Hz
12 V DC, 2.5 A
II