Cleaning And Storage - Vitalmaxx HP-M002 Operating Instructions Manual

Massaging heat wrap
Table of Contents

Advertisement

Available languages

Available languages

4. Connect the mains plug to an easily accessible plug socket which corresponds to the
technical data of the device (see the "Technical Data" chapter).
Massage function Set the vibrating function by repeatedly pressing the
button (9):
1. Light vibration (green vibration control lamp (8))
2. Light vibration with intervals (green vibration control lamp)
3. Strong vibration (red vibration control lamp (7))
4. Strong vibration with intervals (red vibration control lamp)
5. No vibration (both vibration control lamps off)
7. After use switch off all functions by repeatedly pressing the relevant buttons, and
unplug the mains cable from the mains.
The massage function switches off automatically after 30 minutes and the heating
function after two hours in constant operation.

Cleaning and Storage

PLEASE NOTE!
Do not immerse the massaging heat wrap, the controller or the mains cable in water!
Only the cover can be washed.
Do not use any sharp or abrasive cleaning agents or cleaning pads!
Allow the massaging heat wrap to cool down completely after use. After that fold it up
loosely. Do not place any objects on the folded massaging heat wrap, so that it is not
compressed, which could damage the heating coils.
Store the massaging heat wrap in a dry place protected from direct sunshine where
it can't be accessed by children or animals.
If the cover is dirty, open the zip (3) and remove the massaging heat wrap. Then hand
wash the cover and allow it to dry in the air.
Do not put the cover on the massaging heat wrap when it is wet or damp! Do
not try to dry the cover by means of the heating function of the massaging heat
wrap!
Wipe down the controller with a damp cloth if necessary. Then dry it off with a soft
cloth.
17
5. Assume a comfortable position.
6. Select the required function using the controller (6). The
heating and massage functions can be activated both si-
multaneously and individually.
Heating function Set the heating function by repeatedly
pressing the
heating button (11):
1. Low heat level (green heating control lamp (12))
2. High heat level (red heating control lamp (13))
3. No heat (both heating control lamps off)
DE
massage

Advertisement

Table of Contents
loading

This manual is also suitable for:

02844

Table of Contents