Oxford Instruments ANDOR Newton CCD Hardware Manual page 8

Newton
20. If any ingress of liquids has occurred or is suspected, unplug the mains cables, do not use, and contact Andor
Customer Support.
21. When using a liquid cooling system it is recommended that an overpressure device is fitted to avoid leaks that
may find their way to the mains electricity supply and create a hazard. Refer to the information in SECTION 3.7
for general guidelines on the correct installation and use of a liquid cooling system.
22. See SECTION 7.3, "Cleaning and Decontamination".
23. Do not expose the product to extreme hot or cold temperatures.
24. Do not expose the product to open flames.
25. Do not allow objects to fall on the product.
26. Keep this Hardware Guide in a safe place for future reference.
Version 1.4 rev 13 Oct 2017
8