M Ounting The C Amera On The V Acuum C Hamber F Lange - Oxford Instruments ANDOR Newton CCD Hardware Manual

Newton
5.1.3 M
oUnting tHe
1. The SO version of the Newton is fitted with a 6" ICF flange as standard with 16 holes. The holes are on a
rotatable rim which allows adjustment to match the hole pattern on the customer's vacuum chamber with either
a hole indexed to the Top Dead Centre (TDC) position or with holes midway, (360/16)/2 = 11.25° either side of
TDC.
2. A ball spring plunger in the circumference of the rotatable rim will index to positions on, or either side of TDC
with reference to the space between water connectors.
3. Up to 6 of the 16 holes may be obstructed from screw access depending on the orientation of the rim. These
positions will be behind the water connectors and at the bottom corners of the camera body, i.e.:
Version 1.4 rev 13 Oct 2017
c v
aMeRa on tHe acUUM
c f
HaMbeR lange
26