Installation; Installing The Charger; Wall Mounting The Charger; Charging Rack - Nortel Industrial Handset User Manual

Nortel networks user guide industrial handset

Hide thumbs Also See for Industrial Handset:

Table of Contents

DECT Industrial Handset User Guide

3 INSTALLATION

3.1

Connect the power line cable to the back of the charger and then plug the AC adapter

into the mains socket outlet.

3.2

• Drill two holes in the wall, with a horizontal spacing of 45 mm and insert the

screws.

• Use a screwdriver to remove the two screws in the top plate of the charger.

• Turn the top insert plate 90 degrees in the charger and put the screws back in.

• Plug the power cable into the wall socket.

• Hang the charging unit on the screws in the wall.

• Place the telephone handset on the charger.

3.3

The charging rack can contain a maximum of 5 chargers. A maximum of 4 charger

racks can be connected together, using the same AC adapter, with a maximum current

of 5 A.

Issue 02

Galway M1 Design Support

Table of Contents