Table of Contents
Advertisement
counter clockwise 1/2 to 3/4 of a turn, or until you hear or see water
flowing through the valve. To turn the water off, turn the solenoid
clockwise 1/2 to 3/4 of a turn and wait a few seconds for the
valve to close.
8. Program the 410BT series controller (see pages 4-12).
CHART A
Model
30 - 920
30 - 921
INCLUDED
30 - 922
INCLUDED
30 - 923
30 - 924
INCLUDED
30 - 925
6. IN - LINE VALVE INSTALLATION
Rated operating pressure: 10-125 PSI
Recommended Operating Pressure: 10-80 PSI
Warning: Wrap all fittings with Teflon tape! Do not use pipe cement on
fittings or the valve as this will damage the valve and void the warranty!
1. Shut off main water supply.
2. Install a 3/4" ball or gate valve onto the PVC pipe or to the valve
manifold before installing the controller (Figure 6a and 6b).
3
Compatible Valves
BERMAD series 200, HIT series 500,DOROT series 80,
GRISWOLD series2000, DW and BUCKNER series VB valves
RAIN BIRD DV, DVF, PGA, PEB ( 1" only ) , GB, EFB - CP,
BPE, PESB ( 1" only ) and ASVF valves
HUNTER series ASV, HPV, ICV,PGV, SRV, IBV and
ASVF valves
WEATHERMATIC series 12000, 21000, 8200CR valves
IRRITROL series 100, 200B, 205, 217B,
700, 2400, 2500, 2600 and TORO series 220, P220 valves
SUPERIOR series 950, HUNTER HBV and TORO series
252 valves ( 1.5" and larger )
Advertisement
Table of Contents
