Reset To Factory Defaults; Technical Assistance - DIG 410B T Series Instruction Manual

RESET TO FACTORY DEFAULTS

• Press and hold the button on the 410BT for 15 seconds. This will
remove all app settings, historical information, and any set passwords.
This is the only way to remove a password so try not to forget it!

TECHNICAL ASSISTANCE

Should you encounter any problem(s) with this product or if you do
not understand its many features, please refer to this operating manual
first. If further assistance is required, DIG offers the following customer
support:
• DIGPRO Technical Service USA: DIG's Technical Service Team is
available to answer questions in English and Spanish from 8:00 AM to
5:00 PM (PST) Monday-Friday (except holidays) at 1.800.344.2281 or
1.760.727-0914.
• Questions also can be e-mailed to questions@digcorp.com or faxed to
760.727.0282.
• Specification documents and manuals are available for download at
www.digcorp.com.
• Customer Assistance Outside the USA: Contact your local distributor
13