Licensing Errors - Mikroe CODEGRIP FOR PIC User Manual

Firmware erase error
Firmware write error
File not verified
WiFi link authentication failed

6.2 Licensing errors

Error Messages
Unknown registration code
Registration code already approved
License exists
Device doesn't support license
C O D E G R I P f o r P I C M C U s U S E R M A N U A L
The firmware erase operation failed. Check the connection to the
development board and try again.
Firmware update failed. Check connection with the development board
try again.
Firmware is not programmed properly. Try the firmware update process
again.
Link is protected by password in Link Password field. Please enter correct
password.
Troubleshooting
Make sure you have entered correct Registration Code.
Registration code previously used for activation.
Please make sure you haven't already activated CODEGRIP device with
this Registration Code. Check Licenses tab in Configuration Menu Item
(make sure you reloaded configuration).
You can use it to license only one device.
CODEGRIP device has already been licensed for feature corresponding to
Registration Code.
You may have purchased the Registration Code that is not suitable for
your device. Please contact our support.