Motorola MBP846CONNECT User Manual page 44

Table of Contents

Advertisement

Setting up
When the video is cut
off, the application
attempts to reconnect
and this results in lost
sound and choppy
video.
Setting Up
While I am adding a
new Camera to my
account, I am not able
to find any Cameras to
add.
Setting Up
During setup on
devices for Android™
and iOS, I am not able
to find my Camera
during the last step and
the setup fails.
Viewing
When I am in "remote
Camera
mode", the video stops
after 5 minutes. How
do I view for longer?
44
You will need to turn off the Auto Lock
function of your device to ensure
continuous video/audio streaming.
If you are trying to add a Camera
which has previously been added into
your account or another account, you
will first have to reset the Camera. This
can be done by pressing and holding
the PAIR button on the Camera for 5
seconds.
Please reset the Camera to setup
Reload button to start viewing your
mode and try again. Press and hold
the PAIR button on the Camera until
you hear a beep. Wait for a minute for
the Camera to restart. When the
Camera LED is flashing, this indicates
that it is in setup mode. Now restart the
setup from your smartphone again.
When you are accessing your Camera
via a network different from your
home network (over the internet) your
video times out after 5 minutes.
You can click on the Camera again
from the Android™/iOS application
to start streaming again.
If you are accessing from your web-
browser, then you can press on the
Camera video stream again.
Help

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mbp846connect-2Mbp846connect-3Mbp846connect-4

Table of Contents