Power Saving Mode - Motorola MBP846CONNECT User Manual

4.6.3 Delete a camera
1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
the
del/
3. Press the + UP button or - DOWN button to select
+
O button to confirm.
4. Camera
button to select the desired Camera, and press the O button.
5. Press the + UP button or - DOWN button to select
O button to delete that registration.
NOTE
You are not allowed to delete the camera if there is only one registered camera
in the system.
4.6.4 Scan camera
This function is only available when you have more than 1 Baby Unit (Camera).
1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
the
del/
3. Press the + UP button or - DOWN button to select
+
O button to confirm.
4. The screen will then display images from different registered cameras in a
loop of Camera
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press the O button repeatedly to select the available Camera
options from
,
4.7

Power Saving Mode

1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
3. Press the + UP button or - DOWN button to select auto video off after
5 mins, 30 mins or 60 mins if operating on batteries only.
NOTE
The audio will remain and you can press any key to switch the video back on.
Parent Unit Menu Options
add/ view/
will pop up, press the + UP button or - DOWN
add/ view/
, changing about every 12 seconds.
.
, , ,
scan menu will pop up.
scan menu will pop up.
V
is highlighted, and
del, and press the
, then press the
is highlighted, and
scan, and press the
is highlighted.
17