NORMAL PROCEDURES
Flaps Selector Lever ..................................................... UP
Make sure that the selected position is consistent with the position
observed during external inspection. If not, be aware that, once the
airplane is energized, if the handle is lifted from the detent, the
flaps will move to the commanded position.
Free Fall Lever Compartment ....................................... CHECKED
The OVERRIDE switch must be in the NORMAL position and
guarded.
The FREE FALL lever must be full down.
NOTE: If, during the external inspection, one of the gear uplock hooks
is found mispositioned, the free fall lever may be pulled for
uplock hook repositioning. This procedure must be carried out
with gear pins in place.
Page
4
1-02-09
AIRPLANE
OPERATIONS
MANUAL
Code
01
Copyright © by Embraer. Refer to cover page for details.
REVISION 41
Need help?
Do you have a question about the EMB145 and is the answer not in the manual?