Calculated Industries Pocket Handyman IV User Manual page 8

[Weight] — Weight Key
Enters or converts (a volume value) to
tons, pounds, metric tons or kilograms.
Repeated presses will cycle through
these units.
[Conv] [%] — Weight per Volume
Enters or converts the Weight per
3
Volume setting as Tons/Yard ,
3 3 3
Lbs/Yd , Lb/Ft , Metric Ton/m or
3
kg/m . Repeated presses will cycle
through these settings.
[Circ] — Circle Key
Used to enter a circular diameter and
find the area and circumference.
Pressing this key displays values in the
following order: 1) diameter, 2) area 3)
circumference.
[Conv] [Circ] — Arc Length
Used to find the arc length based on an
entered diameter and angle.
Special Functions
[Conv] [÷]
Reciprocal, or 1/x function.
[Conv] [x] — All Clear
Clears all values including memory.
Resets to default settings.
8 – Pocket Handyman IV
®