Calculated Industries Pocket Handyman IV User Manual page 6

[Feet] — Feet Key
This is an entry and conversion key.
You can enter whole or decimal num-
bers. You can also use this key to enter
values in feet-inch-fraction format: (
[Feet] 1 [Inch] 1 [/] 2
played value to feet, press [Conv] [Feet].
Repeated presses toggle between feet-
inches and decimal feet formats.
[Inch] — Inch Key
This is an entry and conversion key
(when used with the
can enter whole or decimal numbers.
You can also use this key with the
key to enter fractional inch values. For
example to enter 3- 3/4 inches, press
[Inch] 3 [/] 4
value to inches, press [Conv] [Inch].
Repeated presses toggle between frac-
tional inch and decimal inch formats.
[/] — Fraction Key
Enters a fraction. To enter a fraction,
enter the numerator, the fraction key
and then the denominator:
Fractions can be entered as proper (1
or less – 1/2, 1/8, 1/16) or improper
(greater than 1 – 3/2, 65/64). If the
denominator (the bottom number) is
not entered, then the currently selected
fractional denominator is used.
6 – Pocket Handyman
). To convert a dis-
. To convert a displayed
IV
®
[Conv]
key). You
2
[/]
3
[/]
1 [/] 2
.
[Rcl] [/]