Setting Fractional Modes - Calculated Industries ULTRA MEASURE MASTER 8025 Pocket Reference Manual

Note: Changing the Fractional Resolution on a
displayed value does not alter your Permanent
Fractional Resolution Setting. Pressing o will
return your calculator to the permanently set
Fractional Resolution.

Setting Fractional Modes

Standard Mode
In Standard Mode, the fractional result is
reduced to its lowest common denominator
(i.e., 8/16 reduces to 1/2).
Constant Mode
In Constant Mode, fractional results remain
in the defined accuracy level (e.g., 1/2 will
be shown as 8/16). Entries of higher accu-
racy values will temporarily override the
fixed fraction setting (see Preference
Settings section for instructions).
P R G — 11
OCKET EFERENCE UIDE