Calculated Industries 5060 User Manual page 21

♦
First Press
Displays the current motor type. Note
there is no motor type in single-phase
mode.
♦
Second Press
In three-phase mode only, subsequent
presses of L will select and
display the next motor type from this
list: SQ-C non-E (Squirrel Cage, non-
Design E), SQ-C E (Squirrel Cage,
Design E), SYNC no codE (Synchro-
nous), WND no codE (Wound Rotor).
D — Dual Element Fuse
♦
First Press
Calculates the minimum amp rating for
a Dual Element Fuse.
Displays: AMPS dE.
♦
Second Press
Displays the full-load current percent
multiplier used to determine fuse size.
Displays: %FLC.
S D
— Single Element Fuse (SEFuse)
♦
First Press
Displays the minimum amp rating
based on phase, motor type, and am-
perage. Displays: AMPS SE.
User's Guide — 19