Calculated Industries 4065 User Manual page 92

(Cont'd)
PREFERENCE
3) Volume Display Format – *Standard (if units entered are the
4) Stairwell—Headroom
Height
5) Rake-Wall Descending
or Ascending
6) Arched Wall Outside
or Inside
7) Jack Rafters Descending – *Descending (Jack rafters are
or Ascending
84 — C
ONSTRUCTION
OPTIONS
same — e.g., Feet x Feet x Feet — the
answer will remain in this format (cu. ft),
but if units entered are different — e.g.,
Feet x Feet x Inches — vol. answer will
always be displayed in Cubic Yards)
– Cubic Yards (vol. answers always
displayed in Cubic Yards, regardless of
unit entry — e.g., Feet x Feet x Feet =
Cubic Yards)
– Cubic Feet (vol. answers always dis-
played in Cubic Feet, regardless of unit
entry — e.g., Inches x Inches x Inches =
Cubic Feet)
– Cubic Meters (vol. answers always
displayed in Cubic Meters, regardless of
unit entry — e.g., Feet x Feet x Feet =
Cubic Meters)
– *6 Feet 8 Inch (default)
– Use + or – key to increase or
decrease above value by 1 Inch
– *Descending (Rake-Wall studs are
displayed from largest to smallest size)
– Ascending (Rake-Wall studs are
displayed from smallest to largest size)
– *Outside (Arched walls are calculated
for outside of the arc)
– Inside (Arched walls are calculated
for inside of the arc)
displayed from largest to smallest size)
– Ascending (Jack rafters are displayed
from smallest to largest size)
M ® P / T
ASTER RO
/ D
RIG ESKTOP
(Cont'd)