U
SING THE
M
ASTER
Entering Dimensions and Units
When entering feet-inch dimensional val-
ues, you must enter the largest dimen-
sion first — feet before inches, inches
before fractions. To enter fractions of an
inch, enter the numerator (value above
the line), press [/] (fraction bar key) and
then enter the denominator (value below
the line).
For all other units of measurement, you
can only enter whole numbers or decimal
numbers. You cannot enter combinations
of units (for example, you cannot enter 12
meters 6 centimeters 4 millimeters).
20 – Measure Master Classic
M
C
LASSIC
numerator
fraction bar
denominator
EASURE
3
—
16
™