Intended Use - Siemens Simotics T-1FW6 Operating Instructions Manual

Description

2.1 Intended use

2.1 Intended use
Risk of death and material damage as a result of incorrect use
There is a risk of death, serious injury and/or material damage when direct drives or their
components are used for a purpose for which they were not intended.
•
•
•
•
•
•
•
Danger to life for wearers of active implants due to magnetic and electrical fields
Electric motors pose a danger to people with active medical implants, e.g. cardiac
stimulators, who come close to the motors.
•
In conjunction with a suitable drive system, the built-in torque motors can be used as direct
drives for the following machine applications:
• Rotary and swivel axes
• Rotary tables, rotary indexing machines, sub-machine assemblies
22
WARNING
Only use the motors for industrial or commercial plants and systems.
Do not install the motors in hazardous zones if the motors have not been expressly and
explicitly designed and authorized for this purpose. Carefully observe any special
additional notes provided.
Only use direct drives and their components for applications that Siemens has explicitly
specified.
Protect the motors against dirt and contact with corrosive substances.
Ensure that the installation conditions comply with the rating plate specifications and the
condition specifications contained in this documentation. Where relevant, take into
account deviations regarding approvals or country-specific regulations.
Contact your local Siemens office if you have any questions relating to correct use.
If you wish to use special versions and design versions whose technical details vary
from the motors described in this document, then you must contact your local Siemens
office.
WARNING
If you are affected, stay a minimum distance of 300 mm from the motors (tripping
threshold for static magnetic fields of 0.5 mT according to the Directive 2013/35/EU).
1FW6 external rotor built-in torque motors
Operating Instructions, 12/2020, A5E49196960B AB