1) Preparation
A. Choose a suitable location for the system. Again, it cannot be mounted and must be placed
on a flat surface.
B. Check the packing list to confirm all accessories are included in the package. Contact
iSpring customer service if any components are missing.
C. Required tools:
2) Feed Water Adapter Installation
•
Close the cold-water supply valve and unscrew the kitchen faucet connector pipe.
•
Install the feed water adapter on the cold-water supply valve and tighten with a spanner
wrench: (make sure the O-ring is seated inside the adapter).
•
Re-install the cold-water hose on the feed water adapter, then tighten with a spanner
wrench (make sure the O-ring is seated inside the hose cap).
Page 7
www.123filter.com
Installation
| (678) 261-7611 |
support@123filter.com