Advertisement
11.
Locate and position center ceiling plywood
panels below Rafter and Short Roof Cleat. Attach
panel to Rafter and Gable Cleat with
8 - 1 1/4" screws. Complete three panels.
12.
Locate and position rear ceiling plywood
panel below Gable Ceiling Cleat and Short Roof
Cleat. Attach panel to both Cleats with
8 - 1 1/4" screws.
13.
Locate Interior Soffits. Interior Soffits sit tight up
against Polygal Panels and Polygal Support Cleats.
Soffits may need to be cut short to fit correctly.
Attach each with 4 - 1 1/2" Finishing Nails. Nail into
edge of short ceiling plywood. Complete all 8.
Toll Free 1-888-658-1658
13A - Short Ceiling
Plywood (Center)
(3/8" x 44 3/4" x 30 3/4") x 3
14A - Short Ceiling
(3/8" x 18 3/4" x 30 3/4") x 3
Tight against
Polygal
16A - Interior Soffits
(1/2" x 3 1/2" x 19") x 8
www.outdoorlivingtoday.com
Page 8
Parts
Parts
Plywood (Rear)
Flush
Parts
sales@outdoorlivingtoday.com
Hardware
S2 - 1 1/4" Screws
x 24 total
Hardware
S2 - 1 1/4" Screws
x 8 total
Tight against Polygal
Support Cleat
Hardware
N1 - 1 1/2" Finishing
Nails
x 16 total
Advertisement
