Advertisement
8.
Locate and position rear ceiling plywood
panel (18 3/4" wide) and position against Rafters
and Roof Cleats. When positioned correctly,
attach to Rafter and Roof Cleat with
12 - 1 1/4" screws. Complete three sections.
9.
Locate and position front ceiling plywood
panel below Rafter and Gable Cleat. Attach panel
to Rafter and Gable Cleat with 8 - 1 1/4" screws.
10.
Locate Roof Cleats Short and one Short Ceiling
Panel. Place Roof Cleat Short flush to Gusset. Attach
Cleat to Gusset using 3 - 2 1/2" screws per Cleat. Hold
a ceiling panel flush to rafter to help you line up the
cleat.
Toll Free 1-888-658-1658
10A - Long Ceiling
(3/8" x 18 3/4" x 71 3/4") x 3
11A - Short Ceiling
(3/8" x 21" x 30 3/4") x 1
www.outdoorlivingtoday.com
Page 7
Parts
Plywood (Rear)
Parts
Plywood (Front)
Parts
12A- Roof Cleat Short
(1 1/2" x 2 1/2" x 30") x 4
sales@outdoorlivingtoday.com
Hardware
S2 - 1 1/4" Screws
x 12 total
Hardware
S2 - 1 1/4" Screws
x 8 total
Hardware
S1 - 2 1/2" Screws
x 12 total
Advertisement
