Advertisement
41.
Locate Ceiling Trims and position over seam
evenly to cover gaps between long ceiling pan-
els.Attach each trim piece with
4 - 1 1/2" Finishing Nails.
42.
Locate the 4 large Window Inserts and
position in window cavity. Nail to window wall
framing with 9 - 1 1/2" Finishing Nails from the
bottom and sides. Complete the smaller window
inserts in the same fashion.
43.
Attach barrel bolt to door
plywood. Male bolt attached to top while female
to bottom door. Attach door handle to top door.
Use 3/4" black headed screws for both pieces.
Toll Free 1-888-658-1658
Pre-drill siding
with 1/8" drill bit.
www.outdoorlivingtoday.com
Page 19
Parts
15A - Ceiling Trims
(1/4" x 2 1/2" x 31") x 4
Parts
15C - Large Window Inserts
(21 1/16" x 26 3/8") x 4
16C - Small Window Inserts
(16 3/4" x 24") x 8
Parts
Barrel Bolt &
Door Handle
sales@outdoorlivingtoday.com
Hardware
N1 - 1 1/2" Finishing
Nails
x 16 total
Hardware
N1 - 1 1/2"
Finishing Nails
x 108 total
Hardware
SB1 - 3/4" Black
Head Screws
x 12 total
Advertisement
