Advertisement
2.
Lift up the 20" Ridge Cap Sleeve and
position over ridge board near the door of
your shed. Leave 1" gap from gable wall.
Screw from underside of sleeve using
3 - 1 1/4" screws.
3.
Push second, third, and fourth sleeves (44 3/4") tight between Gussets and attach as
per Step 2. Attach final sleeve (17 3/4") over Ridge Board at rear of shed. At the rear of your
shed leave a 1" gap between Gable and Ridge Sleeve as per Step 2.
4.
Locate Gusset Cleats (22.5 cut one end) and
position on Rafter flush with Gusset. Attach
Gusset Cleat to Rafter with 3 - 1 1/4" screws.
Complete remaining three Gusset Cleats.
Toll Free 1-888-658-1658
3A,4A,5A - Ridge Cap Sleeve
(3" x 5 3/4" x 20") x 1
(3" x 5 3/4" x 17 3/4") x 1
(3" x 5 3/4" x 44 3/4") x 3
6A - Gusset Cleats
(3/4" x 3 1/2" x 28 1/2") x 4
www.outdoorlivingtoday.com
Page 5
1" Gap
Parts
S2 - 1 1/4" Screws
Gusset Cleats
Parts
sales@outdoorlivingtoday.com
Hardware
x 30 total
Hardware
S2 - 1 1/4" Screws
x 12 total
Advertisement
